Welcome to Binge

  • Free Shipping over KWD 20
  • Support 0900 - 1800
  • Free Returns
  • Secure Payments

TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack


Imported From

4.6 ratings
  • Share

KWD 125.830

- +

Standard Delivery: Get it to Kuwait by 01-April to 05-April

Voltage Disclaimer: Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact binge support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.



Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition. MU-MIMO capability requires both the mesh system and client devices to support MU-MIMO. Free lifetime subscription to TP-Link HomeCare is included with purchase on select TP-Link models at no additional cost. “Lifetime Subscription” refers solely to the life of the purchased device and cannot be transferred. TP-Link reserves the right to modify the service and feature at anytime.

  • If you're looking to ditch your traditional router extender setup for a whole Home Wi-Fi system, put the TP-Link Deco M5 Wi-Fi system on your short list PC mag said
  • Better coverage than traditional Wi-Fi routers: Deco M5 uses 3 units working seamlessly to create a mesh network that can cover homes up to 5,500 square feet. No dead zone anymore
  • Seamless and Stable Wi-Fi: Rather than Wi-Fi range extender that need multiple network names and passwords, Deco M5 allows you to enjoy seamless roaming throughout the house, with a single network name and password
  • TP-Link unique Adaptive routing technology automatically chooses the fastest path for every device and allows for more flexible placement than a satellite system
  • Secure Wi-Fi Mesh Network: Protect your network and connected devices with a free lifetime subscription to TP-Link HomeCare­ featuring Next-level Antivirus, Robust Parental Controls, and QoS
  • Easy to setup: Download the TP-Link Deco app, plug in your system, and follow the instructions to get your new home network up and running in minutes. Works with Alexa as well
  • Each Deco M5 has 2 Gigabit Ethernet ports(6 in total for a 3-pack) and supports Wired Ethernet Backhaul for better speeds. Any of them can work as a Wi-Fi Router. Works with all internet service providers, such as AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink, Frontier, etc.( a modem is required for most internet service providers)
  • Ratings & Reviews

    4.6 ratings
    Customer Reviews
    • A. C.

      No ability to configure channel or transmit power, can't use channel 165

      This was written the day after installing a trio of Deco m5 in "AP" (not "router") mode.My original wireless network consisted of my AT&T/U-Verse BGW210-700 gateway/AP/router downstairs, augmented by a DLink DIR-868L upstairs. The BGW210-700 was rock-solid downstairs and in the area immediately adjacent to the stairs and upstairs hallway, but just couldn't quite cut through the walls, doors, and RF noise from neighbors inside the upstairs bedrooms. I now have a m5 in the front and rear bedrooms, and the "master" m5 in the living room downstairs (forming a reasonably-equidistant triangle.At the time I bought the m5 trio, my alternative was a trio of EAP245v3 or EAP610 APs, paired with TP-Link's Omada software or OC200 controller to enable 802.11r/k/v. Since NONE of TP-Link's current Omada-compatible APs can use 6GHz channels, I knew that pretty much ANYTHING I bought now would be a 1-3 year stopgap purchase. For me, 802.11r/k/v was absolutely a non-negotiable requirement... and AFAIK, TP-Link is the only company that HAS real 802.11r/k/v gear that isn't "enterprise-priced".So... what did I end up having to sacrifice by going with the m5 instead of the EAP+Omada gear?1. M5 doesn't allow you to choose its channel. Period, end of story. It picks the channel, and hopefully you're satisfied with its decision.2. M5 can only use channels 36, 40, 44, and 48. To be fair, AFAIK the EAP2xx gear can't use DFS channels, either. I think SOME of the EAP6xx series can use DFS, but I'm not sure whether ALL of them can.2a. As far as I can tell, M5 never uses channel 165, which has historically been my favorite 802.11ac channel. I'm surrounded by adjacent neighbors using 40Mhz (if not 80MHz) and "wifi for everything", and channel 165 is the awesome wide-open 20Mhz refuge where the unwashed masses never go.3. M5 doesn't allow you to set the max power used by each AP... or set it at all. It has a function to "optimize", but you have absolutely zero control over the decisions it makes.4. There's no setting for 20MHz vs 40MHz. I'm actually not sure whether this is because it ONLY uses 20Mhz channels (which is what I actually prefer), or simply because it doesn't give you a choice.4. If M5 is capable of using different channels for the 3 APs, I haven't seen it do so. I'm pretty sure it is, in fact, limited to using the same channel for all 3. The thing is, I live in a dense neighborhood, and different parts of the house have RADICALLY different interference. If I were configuring the network myself, based on the site survey I did, I'd use channel 36 in one bedroom (where 40 and 44 have neighbor activity, and 48 has occasional neighbor sightings), 48 in the other bedroom (where 40 and 44 have neighbor activity, 48 is almost completely silent, but 36 has some activity from neighbors across the street), and 165 for the AP downstairs (because it's wide open and unused by anyone in my neighborhood). The only reason I wouldn't use 165 for everything is simply to give each AP the maximum possible amount of uncongested bandwidth (they use wired ethernet to connect together).So... for now, I'm deducting one star, mainly because I'm still freaked out about not being able to manually specify channel or output power, and its inability/refusal to use channel 165 (IMHO, the best 5GHz channel of all)... but I'm tentatively giving it enough benefit of doubt to earn 4 stars, since I don't have any complaints about its actual performance yet. Nevertheless, when the time comes to replace it in 2-3 years (to gain 60GHz 802.11ad and 6GHz WiFi6E/7), I'll probably stick to the Omada-series gear so I can feel better about having more granular configuration options.

    • G. C.

      Works as advertised. Ethernet Back haul works

      I bought this for my parents house that had a basic 100 Mbps connection just installed. It was easy to set up (minus a couple snags. Remember to plug them in and sync them to the one by one. Then update the firmware. THEN move them to their final locations/daisy chain them/plug in switches/whatever) and visually looks attractive and unobtrusive enough to not at all be an eyesore; to the point my mother was impressed with how small and pretty they look.My initial impression is that this is a very worthwhile purchase.-----For more particulars about our situation: The house is an old house, with a long rectangular L-shape structure. They recently built an addition and the materials they used, somehow effectively turned the room in to a wifi Faraday cage. Even with their old router directly on the other side of the wall, next to no signal would pass through. And on the opposite side of the house, every time anyone would use the microwave (located in the center of the house) it would completely kill the WiFi for those rooms. It was time for an update.After a bit of research, without having to blow $300+ it was between this (Deco M5), the Google WiFi, and the Orbi RBK23.The Google WiFi had double Nat issues when daisy chaining them that I didn't want to have to worry about in case they were using a combo modem/router from the cable company, which ruled that out (I ended up just buying them a pure modem myself, so moot point).The Orbi Rbk23 has a nice tri-band technology that apparently helps a lot with wireless speeds (because the 3rd band is dedicated to back haul) but the more expensive Orbi RBK50 reportedly connectivity issues that I was worried the RBK23 might inherit.At the end of the day, I was planing to physically connect them by running Ethernet cables through the attic so I didn't really need the RBK23's fancy triband back haul technology for a $70 premium ($180 vs $250 at time of purchase)After everything setup, so far everything functions ALMOST perfectly. The only minor gripes I have are that:1.) This thing is almost *TOO* minimalist and pretty. There are no screw holes, you need to buy a separate mount if you want to stick it on a wall. It is also so lightweight that even weight of slightly dangling, connected Ethernet cables can actually put it off balance and make it tilt.2.) This thing gets fairly warm. Warm enough that my mother commented on it. Warm enough that I reconsidered sticking them to the wall with double sided tape like I was initially planing. They're definitely light enough, but Heat + adhesives doesn't usually workout well.3.) Older devices may have compatibility issues/authentication error issues with the mesh. So far both the HP inkjet printer and my Samsung Galaxy S6 consistently have similar issues where they initially connect, but after some period of time, they would drop signal and run in to an authentication error.This seems to be a firmware issue with the Galaxy S6 and 2.5ghz+5ghz mesh networks in general (regardless of brand as far as I can tell), supposedly there's a workaround that involves shutting off one of the bands (2.5g or 5g) on the router. Since this is also happening to the printer, I assume it's an older tech problem.4.) The App interface is very simplistic, which may feel like a significant step down if you're used to more feature rich routers.5.) The Monthly Report, is creepy. Disable it ASAP.6.) If you use Ethernet backhaul, you cannot use the second Ethernet port on the satellite/secondary routersI.E. You CAN connect the main router to the modem, then connect the router to a switchboard (and even another switch to that switch as I'm doing), then plug the secondary routers (and whatever else) to the switch.You CANNOT try to connect the modem to the router, then the router to a switch, then the switch to the satellite/second routers, and then try to connect anything else to the secondary routers. Trying to do so will automatically change the routers to wireless back haul mode.Some stats for the tech nerds:Speed test results with my laptop:WIRELESS MODE (No Ethernet Backhaul) with no internet usage.Main router (directly connected): 112 Mbps Up. 12 Mbps Down.Main router, 5ghz @ 5ft :110 Mbps down. 12 Mbps upMain router, 5ghz @ 25 ft : 110 Mbps down. 12 Mbps upSecondary Router (60 feet away through 4 plaster walls) directly connected: ~70 to 110 Mbps* 12 mbps upSecondary Router 5ghz @ 5ft: ~70 to 110 Mbps down* 12 mbps upSecondary Router 5ghz @15 ft through 1 wall: ~60 to 110 Mbps down* 12 mbps upWIRELESS MODE (No Ethernet Backhaul) with two 1080p60 video streams going in same roomSecondary Router (60 feet away through 4 plaster walls) directly connected: 70 to 110 Mbps*Secondary Router 5ghz @ 0 ft: 70 Mbps down* 11 mbps upSecondary Router 5ghz @ 5ft: 65 Mbps down* 10 mbps upSecondary Router 5ghz @15 ft through 1 wall: 50 Mbps down* 9 mbps up*Depending on conditions. Signal strength was erratic. At times it would preform at the maximum Mbps possible, but signal strength would randomly drop down to weak, causing the speeds to plummet to less than 1/2 to 1/4 normal speeds.Wired Mode*** (Ethernet backhaul-- Daisy chained: 1 Router connected to 2 switches connected to one another, then connected to the second router. one switch was 10/100/1000, one was 10/100. Will update when replaced.)*** with no internet usage:Main router Direct/5gz @5ft & @25ft: 110 Mbps 12 mbps upSecondary Router 5ghz &@0ft & @5ft & @15ft through wall: 85 Mbps 12 mbps upWired Mode*** (Ethernet backhaul-- 10/100 switchboard in chain. Will update when replaced) with 2 1080p60 streams going in same room***Secondary router 5ghz @ 0 ft 85 mbps 12 mbps upSecondary router 5ghz @ 5 ft 75 mbps 12 mbps upSecondary router 5ghz @ 15 ft through wall 70 mbps 11 mbps up** Also of note: With Ethernet Backhaul, all speeds are significantly more consistent (I.E. My microwave and other miscellaneous interference problem is completely gone)*** I'm FAIRLY certain that the 10/100 Ethernet switch I have daisy chained and connected to the second router is bottle necking the speeds. The third router (My configuration currently looks like |Modem| --> |Main router| --> | Switch One 10/100/100 | --> |TV| + |PS3| + |VR| + |third router| + |Switch Two 10/100| --> |Secondary router|) seems to have speeds of about 110 Mbps, just like the main router.UPDATED: Got a 10/100/100 switch replacement:Main router reports: 115 MbpsSecondary router 5ghz @15 ft through wall, no internet usage: 115 MbpsSecondary Router 5ghz @15ft with two 1080p60 live streams going: 107 Mbps

    • N. R.

      Wifi signal now reaches the out buildings on my property!!

      I have had the Deco Mesh M5 up and running for over a week now and couldn't be happier. I live in a large 3-floor home that was built in the late 1800s, so NOT an open floor plan. We have 8 TVs that stream (no cable tv, just an outside antenna, also bought from Bolo), multiple cell phones, laptops, desktops, and solar panels. I was using (and still am) a Netgear Nighthawk router, it worked well enough but we needed more coverage and I wanted wifi in my outbuildings. My nephew told me to try a mesh system and recommended Deco Mesh. I hard-wired the first mesh satellite to my router using a 30-foot ethernet cable (they say you can use the mesh system in place of the router you currently have, I did not want to do that because of my solar panels). This is located in the middle of my house on the second floor. I placed that first satellite on a front-facing window sill. Once the first mesh satellite was set up, I placed one on the first-floor center of the house and the second one on the first floor in the garage area (both connected wirelessly) I now have wifi 130 feet straight out in front of my house (that is where the outbuildings are). I then changed the settings on our phones to only use the Decomesh wifi, this way as we moved around the house or property the phones would always have a signal. I left the solar panels on Netgear because it is a nightmare to reset the password for them, and depending on the signal strength of the TVs chose the wifi that came in stronger. I did not rate the Technical Support because I did not use it yet nor the interface because I am not sure what that means. If it means how easy was the process, I would say not too bad. If you have some technical knowledge you will be fine. I am by no means great at the tech stuff but I can hold my own. I would recommend this product if you looking for more wifi coverage at a good price.

    • H. P.

      Mejor de lo que esperaba

      Este paquete de 3 sustituye a un Apple Airport Extreme y a un Apple Airport Express que tuve durante varios años en mi casa de dos niveles y que me estaban dando problemas porque se desconectaban entre ellos y la velocidad en la planta alta apenas era de 2.5 Mbps cuando la velocidad de mi proveedor de internet es 55 Mbps (nada extraordinario pero es cable es la mejor opcion en mi zona).La instalación es relativamente sencilla pero no creo que cualquiera lo hubiera podido hacer. Hay que bajar una App y de ahí seguir instrucciones para activar y enlazar uno a uno las tres bases. Yo lo hice todo en la misma habitación y luego me llevé dos bases a los lugares de la casa en donde creo necesito mejor cobertura. Yo ya tenía definido los lugares pero supongo que hay que probar para encontrar la mejor ubicación de cada base.El resto fue muy sencillo, le puse el mismo nombre y contraseña a la red así que no tuve que volver a conectar cada cosa de la casa y poco a poco me fueron apareciendo en la App como dispositivos conectados. La App es la única forma de configurar y controlar las bases o la red. Esto es algo a lo que ya estaba acostumbrado con los Apple Airport pero la App de TP-Link tine mucho mas funciones y opciones para configurar. Yo no le he movido nada y funciona sin problema.El resultado es que ahora la señal de la red es mucho mas fuerte en toda la casa y la velocidad en la planta alta paso de 2.5 Mbps a 45 Mbps!!! No se degrada con la interferencia de otras redes (hay com otras 10 alrededor de mi casa) y la velocidad es constante o yo no noto la diferencia. Es importante aclarar que en mi casa, lo mas demandante que hacemos es ver Netflix en HD en dos teles o en una tele y un iPad mientras usamos otras cosas que no consumen mucho ancho de banda.Yo esperaba una diferencia de velocidad entre la planta baja y la planta alta mucho mayor, había leído que podía ser hasta 40% menos pero estoy muy contento de que solo sea 10% menos, entiendo que esa diferencia es algo normal y me parece que este producto ha resuelto mi necesidad muy bien. El precio varía mucho, yo lo puse en el carrito cuando estaba como en 7 mil y compre cuando estaba casi a la mitad!!!

    • A. V.


      es un equipo excelente, tengo una casa de aproximandamente 20 x 70 mts lo que hice fue conectar estos equipos para alcanzar las zonas donde no se tiene alcance tengo un router uno de ellos lo configuré como AP y los demas como MALLA con el mismo SSID, muy buena calidad cada equipo cubre una area de 20x20 mts se recomienda construir la malla con los equipos lo mas cerca entre ellos que se pueda, se pueden poner a 5 a 7mts entre ellos no recomiendo que sea más lejos por que se degrada la señal pero a esa distancia entre ellos funciona excelente y un solo SSID para toda la casa no necesitas poner más. Lo padre de esta solucion es que es incremental si aun con estos 3 routers tienes puntos ciegos donde no se alcance la WIFI puedes o comprarlos por separado de una sola pieza e lugar de 3 vas a tener 4 equipos, es una de las soluciones más baratas y buena que encontré, Las nuevas soluciones para extender tu red lo pueden buscar como WIFI MESH for HOME, hay muchas marcas que les pueden ayudar para mejorar el desempeño de la WIFI en tu casa, lo intente con extensores de rango de otras marcas y esta es la mejor solucion que les puedo recomendar. suerte

    Similar Products from Whole Home & Mesh Wi-Fi Systems

    Similar Products by TP-Link

    Product FAQ

    About the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack

    The TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack is now available at binge.com.kw, the leading provider of products from sellers in the US, UK and India, straight to your doorstep in Kuwait, with all prices inclusive of customs and duty. Buy the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack" and +20 million others from across the globe and straight to your door. We beat our competitors’ prices as well as self-shipping rates from the Kuwait.

    Delivery and Warranty Information on the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack

    We deliver the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack to Kuwait City, Al Jahra, Al Ahmadi, Al Farwaniyah, Hawally and more within the Kuwait. All delivery times mentioned are estimates, and delays may take place due to unforeseen events in logistics and/or customs. If the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack is opened by customs, it will be clearly marked with customs issued taping and packaging. The TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack will be delivered straight to your door. For warranty related concerns of the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack, please contact binge support. We will assist you with manufacturer warranty support.

    Authenticity and Safe Shopping for the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack

    The TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack is protected by the Binge authenticity check. The TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack will be inspected by our consolidation and fulfilment team to ensure that the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack is sealed and in its original packaging with no wear or damage in the shipping process. If at any step our team notices anything of concern, you will be informed and asked o how to proceed. Once received, if you feel that the TP-Link Deco Mesh WiFi System(Deco M5) –Up to 5,500 sq. ft. Whole Home Coverage and 100+ Devices,WiFi Router/Extender Replacement, Anitivirus, 3-pack to be non-genuine or not match the product images/description, we will provide with a replacement from a new seller or a full refund, depending on your choice.

    Product Disclaimer: All product information listed on the site are from 3rd party sources, including images and reviews. Binge.ae is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or binge support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. Binge.ae follows the rules and regulations of sale in Kuwait and will cancel items in an order that are illegal for sale in Kuwait. We take all the necessary steps to ensure only products for sale in Kuwait are displayed. Product stock and delivery estimate may change with the seller even after placing the order. We strive to process your order as soon as it is finalized.