Modway Attainment Vinyl Drafting Chair - Drafting Stool With Flip-Up Arm in Black

Customer Reviews

• R. L. B.

  CYLINDER WILL NOT HOLD PRESSURE IN HIGH POSITION - TRY THIS EASY FIX

  PLEASE READ THIS -- If your chair is sinking when you sit in it in high position -- PLEASE READ THISMy chair is only a couple of years old, but has never held the high position even when it was brand new and has gotten progressively worse. I don't weigh anywhere near the 330 pound limit for the chair. So, we took the chair apart to see if the cylinder could be replaced. And the answer is "NO, it cannot be replaced". However, since we put the chair back together it has stopped sinking when I sit in it. REALLY???? What's up with that! My husband said that most likely the seal in the cylinder was a little dry which allowed the gas to leak a little inside. When we took the cylinder portion off of the chair the lubricating oil inside the cylinder flowed around and re-moisturized the seal enabling it to hold the pressure. So, if your chair is sinking, TURN IT UPSIDE DOWN FOR A COUPLE OF HOURS so that the lubrication oil will drain down to the seal at the top of the cylinder. When we found out the cylinder couldn't be replaced, I went off immediately and ordered a new chair. Now mine is working just fine and the new one arrives tomorrow. UGH!! BTW - I really like this chair now that it is fixed! It's very comfortable and is holding up nicely.

  See more See less

• E. G.

  Most uncomfortable chair I've ever had

  I've been working at home full-time for about a decade. As you might imagine, I've been through a fair number of chairs in that time. Recently, I switched to a sit-stand desk that's programmable and fully adjustable. I decided I'd like a drafting chair to keep me closer to the standing height even when sitting, but also to make the transition faster. After some research, I settled on the Modway Attainment chair.The good: It looks fine. I like that the armrests can be lifted out of the way. After some adjustments, it reclines and move easily. The price is solid.The bad: It's just flat the most uncomfortable chair I've ever owned of any type, period. I don't know what's happening, but within seconds of sitting in this chair, my butt, lower back, and upper legs are all screaming at me. In an attempt to salvage the chair, I bought a $30 memory foam pad. While it helped a little, it only delays the severe pain by about 5 minutes, tops. Right now, I'm sitting in a $30 Ikea chair with no adjustments and I'm much more comfortable. To be clear, this chair it not a good chair either, so I'm getting something else.

  See more See less

• M. J.

  Not really the advertised height

  I purchased this model specifically because I needed it to be at least 31 inches tall. When I assembled it, it was that tall as long at it was extended to full height, but almost as soon as I actually sat in it, it started to sink. I tried to return it but could not get the thing apart. The pneumatic stem just slots in to the stand at the bottom but, once it's in, you can't ever get it out again. I persevered in the hope that it wouldn't sink any further.Now it's too late to return it and the height has continued to sink. It's now settled to a fully-extended height of 28 inches, well below the height I need and I seem to be stuck with it.

  See more See less

• N. D.

  Very Comfortable

  This is a decent chair for the price as compared with what else is on the market. It takes about 10 min to assemble and there is a large range for height adjustment. The arms also fold up and out of the way if needed. I find the chair to be very comfortable and sit in it many hours a day without any cramps or pains. it doesn't seem like it is the highest quality, but also not poorly manufactured. Should last for a very long time. Definitely recommend.

  See more See less

• L. C.

  Craft /Drafting Chair... Pros and Cons

  PROS: Got this yesterday, fast on time delivery. Excellent chair. I am 5' 1" and the seat and back fit my lower and upper arch of my back perfectly. The padding in the seat is very nice. It is very comfy and room to move around. The material/fabric seems like it will last if not , it will be very easy to cover. Since I put all my items that I purchase together, this was easy to do .CONS : 1. BUT ... someone needs to 'proof read" your instructions and add a few missing directions for a person that may not have put any products together. 2. I think the loop on the rod of the chair could have been made a little bit bigger (for us "shorties" I do not have long legs)... to be able to use it for a foot prop while sewing without turning the chair sideways to use it. All in all, great product!

  See more See less

• «
• ‹
• 1
• 2
• 3
• ›
• »